• Pressure Regulator is hygienic and food grade first grade plastic It is a product that controls water pressure.
• It is manufactured for a distance of 80 mt according to the standards.
• It is also possible to use it in the middle of the line.
• To clean the line, first turn the taps at the end of the line to the open position and adjust the nut on the bottom of the regulator upward It is necessary to keep it pressed.
R01-01 – Regulator End-Line Set
R01-02 – Water Level Hose Set
R01-03 – 1/2 Plastic Tap
R01-04 – 1/2 Plastic Tap with Square Adapter
R01-05 -Square – Circular Reduction
R01-06 – Diaphragm Set
R02-00 – Bypass Pressure Regulator
- Pressure Regulator is hygienic and food grade first grade plastic It is a product that controls water pressure.
- It is manufactured for a distance of 120 mt according to the standards. It is also possible to use it in the middle of the line.
- To clean the line, first turn the taps at the end of the line to the open position and Turn on the Flush tap.
R02-01 – End-Line Set
R02-02 – Water Level Hose Set
R02-03 – 1/2 Plastic Tap with End-Line
R02-04 – Diaphragm Set
R02-05 – Flush Tap
R02-06 – Water Inlet Fiting
R02-07 – Ust kelepçe 3Omm
R02-08 – Ust kelepçe 3Omm
R02-09 – Blind Plug
R03-00 – Slope Regulator
- The reduction of the water column at these slope regulators is achieved by weights {for fixed values} or by a spring {for the adjustable version}.
- The water flow will open only after the pressure of the reduction is exceeded.
R03-01 – 22x22mm Square Pipe End Line Plastic
R03-02 – 26,7 mm Circular pipe End line Plastic
R03-03 – Imperforate End line Plastic
R03-04 – Imperforate End line Plastic With Tap
R03-05 – End line Plastic with Tap
R03-06 – Water Line Cutter Tap
